© 2025 – All rights reserved.

Low pressure homes in Kannur: shower heads that still feel great

Many Kannur apartments and older houses run at 0.3–0.5 bar. You can still get a satisfying shower—if you choose hardware that works with your pressure, not against it. Here’s a simple guide to pick right the first time.

Step 1: Quick pressure reality check (no tools needed)

  • Open your current hand shower fully.
  • If the spray feels weak beyond ~30–40 cm, treat it as low pressure.
  • Long pipe runs, thin lines or distant geysers also point to low pressure.
    (For a precise reading, your plumber can test with a gauge—but you don’t need one just to shortlist products.)

Step 2: Pick hardware that helps—not fights—low pressure

  • Overhead size: Choose 6–8 inch rain heads. Very large 10–12″ heads need more pressure.
  • Spray type: Look for air-mix/aerated or focused multi-mode sprays on hand showers—they feel fuller at low pressure.
  • Hand showers: Excellent at low pressure. A multi-mode hand shower lets you switch to a tighter, stronger spray.
  • Mixers & diverters: Quality ceramic cartridges reduce internal friction and feel smoother.
  • Routing: Keep elbows and long loops to a minimum—every bend steals pressure.

Step 3: Match with your water heater

Low pressure plus instant geysers can give lukewarm showers. For multi-person routines, consider a 10–15 L storage heater so temperature and flow stay consistent.

Real-world combos that work

  • Apartment, single bathroom: 6–8″ overhead + 2-mode hand shower on slide rail + single-lever mixer.
  • Family home: 8″ overhead + 3-way diverter (overhead/hand/jet) + storage geyser sized to usage.
  • Guest/elderly bath: Skip a large overhead; choose a good hand shower with easy grip and height adjustment.

What to avoid at low pressure

  • Oversized overheads (10–12″) that mist instead of showering.
  • Long diverter chains with multiple elbows.
  • Cheap cartridges that stiffen and choke flow over time.

How we help you choose

  • Shortlisting heads/hand showers engineered for low pressure (from our authorised brands).
  • Checking cartridge quality, spray plate design and spec sheets for minimum working pressure.
  • Matching your heater capacity and pipe layout to the set you select.
    Bring a short video of your current shower or describe your setup on WhatsApp—we’ll guide you to a confident pick.
Q1. Should I remove the flow restrictor?

Not recommended—choose a head designed for low pressure. Removing parts can void warranties.

Q2. Will a booster pump fix everything?

It helps, but sizing and plumbing layout matter. We’ll advise if it’s worth it for your home.

Q3. Can I keep my large overhead?

Only if your pressure supports it. Otherwise, pair it with a strong multi-mode hand shower and use that daily.

How to measure 220 vs 305 mm WC rough-in (2-minute guide)

This single measurement prevents most returns. Do it before you pick a close-coupled or one-piece WC.

First—know your outlet

  • S-trap: Outlet goes into the floor (most older homes).
  • P-trap: Outlet goes into the wall.

This guide focuses on S-trap (floor outlet) rough-in.

Measure S-trap rough-in (floor outlet)

  1. Find the centre of the floor outlet (or the old WC’s outlet).
  2. Measure from the finished wall (tiles included) to that centre point.
  3. You’ll usually get 220 mm or 305 mm. Note it down.

If your result is odd (e.g., 240 mm), bring a photo and measurement. Some models or adjustable connectors can accommodate; we’ll confirm on-site.

For P-trap (wall outlet)

  • Measure from the finished floor to the centre of the wall outlet (height).
  • Bring this measurement; we’ll match a compatible P-trap bowl.

Why rough-in matters

  • The bowl’s trap must line up with the outlet.
  • Choosing the wrong rough-in often means returns or rework.

What else to confirm before you buy

  • Seat compatibility: shape & hinge type.
  • Cistern/frame: brand family (for wall-hung).
  • Water use: look for dual-flush 3/6 L.
  • Pressure realities: if showers are low pressure, choose shower hardware accordingly.

Bring your measurement to us

Visit our CERA Style Gallery & Jaquar Display Studio in Thana, Kannur with photos and measurements—we’ll shortlist options that fit first time.

Q1. Can I convert 220 mm to 305 mm?

Sometimes—with offset/adaptor fittings or specific models. We’ll check feasibility.


Q2. Does brand matter for rough-in?

Yes—dimensions vary. We match your rough-in to brand-correct bowls.


Q3. Tiles not installed yet—when should I measure?

Measure after tiling for accuracy (finished wall). If not possible, add tile thickness to your reading.